7 500 دج
DESCRIPTION
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!
NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones
Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag.
The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer! We also include onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc.
Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1" header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a 13.56MHz 1K card! (You can get more tags from us here)
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use!
NFC (Near Field Communications) is a way for two devices very close to each other to communicate. Sort of like a very short range bluetooth that doesn't require authentication. It is an extension of RFID, so anything you can do with RFID you can do with NFC. You can do more stuff with NFC as well, such as communicate bi-directionally with cell phones
Because it can read and write tags, you can always just use this for RFID-tag projects. We carry a few different tags that work great with this chip. It can also work with any other NFC/RFID Type 1 thru 4 tag.
The PN532 is also very flexible, you can use 3.3V TTL UART at any baud rate, I2C or SPI to communicate with it. This chip is also strongly supported by libnfc, simply plug in an FTDI cable and use the FTDI serial port device to communicate - this lets you do NFC dev using any Linux/Mac/Windows computer! We also include onboard power LED, 3.3V regulator and an FTDI header so you can plug in an FTDI friend or FTDI cable and use with libnfc.
Comes with: the PN532 breakout board including a tuned 13.56MHz stripline antenna, 0.1" header, 2 jumpers/shunts and a 4050 level shifter chip. We also toss in a 13.56MHz 1K card! (You can get more tags from us here)
الفئات:
غيرها من التكنولوجيا العالية
المنطقة:
الجزائر / الجزائر
وضع في:
04-09-2020 à 21:34:17
إعلانات مشابهة
Afficheur LCD 1602 Keypad Shield Arduino
MHTronic vous propose des Module écran LCD 16x2 et clavier (LCD keypad shield 1602)
Caractéristiqu...
BLIDA/
ALGERIE
الحالة: Etat neuf
1 200 دج
Buzzer actif 5V Arduino
MHTronic vous propose modules Buzzer actif 5V pour arduino
CARACTERISTIQUES:
* Tension de fonction...
BLIDA/
ALGERIE
الحالة: Etat neuf
450 دج
Carte D'extension De Stockage Micro SD Arduino
Vous pouvez commander directement sur notre site internet
يمكنك الطلب مباشرة على موقعنا
https://powe...
BLIDA/
ALGERIE
الحالة: Etat neuf
500 دج
Carte d'extension de stockage Micro SD Arduino
Vous pouvez commander directement sur notre site internet
يمكنك الطلب مباشرة على موقعنا
/
MHTronic...
BLIDA/
ALGERIE
الحالة: Etat neuf
500 دج
Mini Fraiseuse Numérique CNC
Machine cnc chassis 60 cm * 60 cm avec Spindel 2,2 kw + moteur nema 23 et driver 5.4 A
Afficheur...
BLIDA/
ALGERIE
الحالة: Etat neuf
125 000 دج
Relais WIFI 8 / 4 / 2 / 1 Canaux ESP8266 Arduino
MHTronic vous propose des modules Relais WIFI 8 / 4 / 2 / 1 Canaux basé sur le fameux ESP8266
Aff...
BLIDA/
ALGERIE
الحالة: Etat neuf
100 دج
détecteur de proximité inductif (NPN) 6-36V Arduin...
Vous pouvez commander directement sur notre site internet
يمكنك الطلب مباشرة على موقعنا
/
vous prop...
BLIDA/
ALGERIE
الحالة: Etat neuf
1 100 دج
Carte de programmation pour attiny 85/45/25/13A Ar...
Vous pouvez commander directement sur notre site internet
يمكنك الطلب مباشرة على موقعنا
/
MHTronic...
BLIDA/
ALGERIE
الحالة: Etat neuf
600 دج
SHIELD DE PROTOTYPAGE AVEC BREADBOARD POUR ARDUINO
Vous pouvez commander directement sur notre site internet
يمكنك الطلب مباشرة على موقعنا
https://www....
BLIDA/
ALGERIE
الحالة: Etat neuf
600 دج
Ramps 1.4 mega + 5 piece A4988 Arduino
MHTronic vous proposeLe Ramps 1.4 est un "shield" open-source interfaçant les éléments électronique...
BLIDA/
ALGERIE
الحالة: Etat neuf
2 500 دج