High-Class Finish with Aluminium Top Plate
With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.
Freezer_36_Series_Intel_LGA1700_Tested-and-Confirmed
Freezer 36 – Tested and Confirmed by Intel
Intel has tested and confirmed the Freezer 36 on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with contact frame and the cooler's performance.
Intel® Product Compatibility Tool
Freezer_36_Serie_AMD_Intel
Future-Proof Compatibility
The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
Freezer_36_ARGB_Black_Fan-Montage
Improved Fan Mounting
Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.
Freezer_36_Serie_Contact_Frame
LGA1851 | LGA1700 Contact Frame
Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
Freezer_36_Fluid-Dynamic-Bearing_Black_EN
High-Quality Bearing
Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
Freezer_36_ARGB_Black_Heatsink-Airflow
Optimised Heatsink
The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
Freezer_36_ARGB_Black_P-Fan
P-Fans - High Static Pressure and Impressive Colours
ARCTIC relies on the proven P-fans with A-RGB illumination. The P-series, which is known for its powerful performance, is particularly suitable for use on heat sinks and radiators. The 12 built-in LEDs can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fans can therefore be fully illuminated directly via the A-RGB mainboard connection and synchronised with the lighting of other hardware.
ARCTIC's partner SignalRGB offers a comprehensive solution for synchronisation and individual configuration of the illumination.
With its push-pull configuration, the Freezer 36 A-RGB not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.
Freezer_36_Series_Intel_LGA1700_Tested-and-Confirmed
Freezer 36 – Tested and Confirmed by Intel
Intel has tested and confirmed the Freezer 36 on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with contact frame and the cooler's performance.
Intel® Product Compatibility Tool
Freezer_36_Serie_AMD_Intel
Future-Proof Compatibility
The Freezer 36 A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Freezer 36 can be used with the new LGA1851 socket from Intel without limitation.
Freezer_36_ARGB_Black_Fan-Montage
Improved Fan Mounting
Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 A-RGB is therefore compatible with most 120 mm fans.
Freezer_36_Serie_Contact_Frame
LGA1851 | LGA1700 Contact Frame
Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the DIE and the solder layer between the DIE and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.
Freezer_36_Fluid-Dynamic-Bearing_Black_EN
High-Quality Bearing
Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.
Freezer_36_ARGB_Black_Heatsink-Airflow
Optimised Heatsink
The fins of the heatsink are open at the side and allow the pull fan to draw additional cool air out of the pc case through the heatsink. This side-flow design achieves even more efficient ventilation.
Freezer_36_ARGB_Black_P-Fan
P-Fans - High Static Pressure and Impressive Colours
ARCTIC relies on the proven P-fans with A-RGB illumination. The P-series, which is known for its powerful performance, is particularly suitable for use on heat sinks and radiators. The 12 built-in LEDs can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fans can therefore be fully illuminated directly via the A-RGB mainboard connection and synchronised with the lighting of other hardware.
ARCTIC's partner SignalRGB offers a comprehensive solution for synchronisation and individual configuration of the illumination.
الفئات:
إعلام آلي وهواتف
المنطقة:
جلفة /
الجزائر
وضع في:
23-08-2025 à 12:18:46
