TI-25DL Ultrasound Wall Thickness Gauge / Jauge d'épaisseur de paroi à ultrasons

Description

The new TTI-25 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Includes standard probe for all solid metals except ( cast iron ) 1/4' diameter, 7.5mz dual element transducer. 0.025 to 6.00 inches

Wall thickness on hard materials including corrosion of tank walls, piping and hull plates
Inspection of metals including steel, cast iron (malleable, and spheroidal graphite), aluminium, copper, brass, titanium, sheet metal, storage tanks, ships, structures and piping systems.
Inspection of non-metals including glass, ceramics and hard plastics (except acrylic resin)
Direct readout of thickness inches or mm
Built in test plate
Calibrate for a wide range of rigid materials
Scan mode for surveying large areas
Data Logging option
Special probes for high temperature
Acoustic velocity table for common materials included

+

Catégories: Outils

Région: ORAN / ALGERIE

Publiée le: 24-06-2023 à 12:28:05

Caillebotis Grille de Ventilations de Céréales

Nous fabriquons differents Formats de Grille de Ventilation des Céréales en tôle Pérforées , Trous...

ALGER ALGERIE Etat:

Sangle d'arrimage

Fabrication Des sangles d'arrimage 35 mm / 50 mm / 75 mm / 100 mm longueur : 8 M / 10 M Livré av...

ALGERIE Etat: