Prix XTOOL Anyscan A30M

50 000 DA

XTOOL Anyscan A30M Wireless OBD2 Scanner for iOS/Android Bi-Directional Scan Tool with OE-Level System Upgraded Ver. of XTOOL A30, A30D

Difference of the A30 A30D A30M

A30 with full systems diagnostic +5 Special Functions

A30D with full system diagnostic +11 Special Functions

A30M with Full system diagnostic +21 Special Functions

A30M Functions

1.Read fault Codes For All System ,such as ECM, TCM, ABS, SRS, BCM, IMM, BMS, TPMS, SAS, Fuel System, Light System, Wiper System, etc

2. Bi-Directional/Active Test + Adaptation + Matching

3. Full OBD II and EOBD functions

4. 21 Maintenance Functions+Auto VIN Scan Tool

5. Support 115 vehicle brands

6. Live Data Stream Graphing + Data Record+Remote Diagnostic Car Scanner

7. Vehicle owner community

8. Compatible with both Android / iOS handsets and tablets

9. Palm-sized, portable, and powerful

10.No area and Car model Limited

11.Read Voltage of car power supply

12.Easy Find OBD2 interface with light
21+Special Functions:
1.Oil Reset：Close the oil service light and reset service mileage & service interval after replacing the engine oil.

2.Electroniac Parking Brake Reset：Reset the new electronic parking brake for braking wheels safely again.

3.Throttle Relearn: Allows to reset the throttle actuators to accurately regulate throttle (or idle engine) operations, helps keep your idling and acceleration smooth.

4.Tire Pressure Monitor System Reset:Relearn TPMS sensors so that new sensors can be recognized by ECU.

5.ABS Bleeding:Get a firm brake pad after air exhaustion.

6.Tooth Learning：Finish tooth learning after changing crankshaft in the car engine, so the new part can be used.

7.Seat matching：After replacing the new seat, you need to use A30M to re-match the vehicle data

8.DPF Regeneration: Allows to clear PM from the DPF filter through oxidation or combustion to stabilize the filter performance.

9.Injector Coding: Allows to write a new code to the ECU for accurate communication and Injection control. After the ECU or injector is replaced, the cylinder can better identify injectors to accurately control fuel injection.

10.SAS Adjustment: Allow to clear the fault steering angle sensor memories, perform reset steering angle sensor, and turn off steering wheel warning light.

11.BMS Reset: Reset after replacing the battery to clear the low battery fault information of the original battery and protect the new battery.

12.A30M also including theBattery matching,Suspension system matching,Headlight adjustment,Window initialization,Airbag reset,Electronic water pump activation,Tyre modification,De-transport mode, Cylinder matching

Catégories: Outils de diagnostics

Région: Touggourt / ALGERIE

Publiée le: 20-04-2024 à 13:33:15