
The engineers are responsible for the installation and servicing of all the company products within the Algeria Market.This is a home based and office role with a requirement to travel throughout Algeria as required and as directed by the Service Manager. Engineers are informed by the office which work needs to be undertaken, engineers are then expected to work under their own initiative to complete the tasks appointed, if necessary, problems or issues are escalated to the office.Activities include planned maintenance, emergency corrective maintenance, upgrades, installation work, courtesy calls to local customers and telephone support either from the office or from a remote location. Jobs may require the engineer to be away from home for several days at a time. There is a need for occasional travel to sites outside of Algeria.Technically the work involves a very diverse skill set including fault finding complex electronic systems down to component level, HT and RF power generation, vacuum systems, water systems, pressurized gas systems, mechanical assembly and adjustment of the radiation beam to achieve the required output specification.Training and assessment are carried out both in the classrooms and on site as necessary. Engineers will not be deemed to be competent to install or maintain a product until the Service Manager has confirmed that the relevant competences and skill have been achieved. Engineers with the relevant knowledge and experience will be expected to guide and assess other engineers on site and advise the Service Manager accordingly.Upon completion of any work on site, the engineer is required to complete and submit to the appropriate manager the relevant reports and documentation.
Mission :
To have excellent knowledge and proven skills in electronics, mechanics, pc’s & servers, networking, high vacuum, high/low voltage & current, equipment and a general knowledge of all engineering disciplines.To be able to fault find and repair at board level & below.To be able to manage own workload.To be highly motivated, dynamic, have good leadership skills & be a god problem solver.To have a strong customer focus and have excellent customer service skills. To ensure that all customers are provided with high quality care and attention throughout the sales and service process, so that each customer is fully satisfied with the support they receive.An excellent communicator at all levels. Written and verbal output shall be concise and accurate.To engender and support the company values.To represent the company in a professional and positive manner.To complete the administration requirements of the role in accordance with the quality system in a timely and accurate manner.To follow at all times the company quality and safety policies.To be prepared to work as required at times and locations dictated by the needs of the customer and the management.To provide feedback to the Service Manager any problems, solutions or opportunities which may need to be communicated to other parties.To carry out without supervision corrective maintenance within acceptable timescales prompting escalation of the problem if required and maintaining ownership of problem until customer is satisfied.To install without supervision all systems within the product portfolio to the required specification and within the project timescales. (Subject to completion of training)To assist in the promotion and sale of upgrades and options.To identify and implement improvements that enhance the customer’s satisfaction.Demonstrates innovation with regard to installation processes and the Service Business.To provide training to other staff when necessary. (Subject to completion of training)To undertake any other duties as required.
Profil :
Key performance competenciesExcellent communication and customer management skills.Competent with relevant IT technology including Windows OS, Microsoft Office applications, networking.Proven ability to manage own environment and complete the tasks deployed to them.Team player.Ability to travel extensively.Travel aware & clean driving license.Abilities to speak English.Relevant ExperienceFormal technical qualification.Previous experience in the biomedical maintenance.
Mission :
To have excellent knowledge and proven skills in electronics, mechanics, pc’s & servers, networking, high vacuum, high/low voltage & current, equipment and a general knowledge of all engineering disciplines.To be able to fault find and repair at board level & below.To be able to manage own workload.To be highly motivated, dynamic, have good leadership skills & be a god problem solver.To have a strong customer focus and have excellent customer service skills. To ensure that all customers are provided with high quality care and attention throughout the sales and service process, so that each customer is fully satisfied with the support they receive.An excellent communicator at all levels. Written and verbal output shall be concise and accurate.To engender and support the company values.To represent the company in a professional and positive manner.To complete the administration requirements of the role in accordance with the quality system in a timely and accurate manner.To follow at all times the company quality and safety policies.To be prepared to work as required at times and locations dictated by the needs of the customer and the management.To provide feedback to the Service Manager any problems, solutions or opportunities which may need to be communicated to other parties.To carry out without supervision corrective maintenance within acceptable timescales prompting escalation of the problem if required and maintaining ownership of problem until customer is satisfied.To install without supervision all systems within the product portfolio to the required specification and within the project timescales. (Subject to completion of training)To assist in the promotion and sale of upgrades and options.To identify and implement improvements that enhance the customer’s satisfaction.Demonstrates innovation with regard to installation processes and the Service Business.To provide training to other staff when necessary. (Subject to completion of training)To undertake any other duties as required.
Profil :
Key performance competenciesExcellent communication and customer management skills.Competent with relevant IT technology including Windows OS, Microsoft Office applications, networking.Proven ability to manage own environment and complete the tasks deployed to them.Team player.Ability to travel extensively.Travel aware & clean driving license.Abilities to speak English.Relevant ExperienceFormal technical qualification.Previous experience in the biomedical maintenance.
Catégories:
Ingénierie
Région:
ALGER / ALGERIE
Publiée le:
01-08-2024 à 02:27:33
Annonces similaires
Abonné Pro
Développeur Odoo
INSIDJAM, une société qui propose une suite progiciels de gestion intégrés, composée d’un ensemble d...
BOUMERDES/
ALGERIE
Abonné Pro
Développeur Front-End
Afin de renforcer son équipe, Charikatec.com est à la recherche de développeurs Front-End avec une p...
BOUMERDES/
ALGERIE
ingénieur biomédical
RECRUTMENT INGENIEUR BIOMEDICAL EN BLOC OPERATOIRE
GLOBAL QUICK PROCESSING société d’importation et...
ALGERIE
Informaticien
Maintenance préventive et curatif du parc de SOM'S chez les clients
Responsabilités
Prévisions piè...
BEJAIA/
ALGERIE
Maintenance I&C ( Instrumentation and control ) en...
ALGER/
ALGERIE
Mechanical Maintenance Engineer
BLIDA/
ALGERIE
Software support Engineer
ALGER/
ALGERIE
Développeur Odoo
INSIDJAM, une société qui propose une suite progiciels de gestion intégrés, composée d’un ensemble d...
BOUMERDES/
ALGERIE
Agents commerciaux & Software developer.
Nous sommes une entreprise sise a BAB EZZOUAR, spécialisée dans la conception et la commercialisatio...
ALGERIE
OFFICE MANAGER
Envie de prendre part à un nouveau défi ?
Sous la responsabilité du PDG de WIDETECH Algérie, vous au...
ALGER/
ALGERIE