Klüberplex BEM 41-132 400gr

Klüberplex BEM 41-132 is based on synthetic hydrocarbon oil, mineral oil and a special lithium soap. Special additives ensure optimum oxidation resistance as well as protection against wear and corrosion.
Content: 400g cartridge
Color: yellow
Available as 120ccm cartridge, 400g cartridge, 1kg tin, 170kg barrel
Benefits for your application

Longer service life due to special wear additives for roller bearings
Less maintenance
Versatile grease due to wide operating temperature range and optimised oil release
Application

Klüberplex BEM 41-132 can be used for long-term or lifetime lubrication of rolling bearings at operating temperatures between 70 and 110 °C.
For rolling bearings with a high degree of sliding friction, e.g. tapered roller bearings, cylinder roller bearings, spherical roller bearings
For-life lubricated deep groove ball bearings and rolling bearings e.g. in paper-making machines (dry section), textile machines (dry section), electric motors, hot air blowers drying ovens, air separators in the base materials industry, generators in wind power plants
Rolling bearings in vehicle components
Clutch bearings
Generator bearings
Water pump bearings
Fluid fan bearings
Technical specifications

Lubricating greases -K, DIN 51825 in connection with DIN 51502 KPHC2N-30L
Chemical composition, thickener special lithium soap
Chemical composition, type of oil synthetic hydrocarbon oil
Chemical composition, type of oil mineral oil
Lower service temperature -40 °C / -40 °F
Upper service temperature 150 °C / 302 °F
Color space yellow
Density at 20 °C approx. 0.90 g/cm³
Worked penetration, DIN ISO 2137, 25 °C, lower limit value 265 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value 295 x 0.1 mm
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C approx. 120 mm²/s
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C approx. 14 mm²/s
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration:
1 week, distilled water = 250 °C
Speed factor (n x dm) approx. 1 000 000 mm/min
Oil separation, DIN 51817 N, after 7 d/40 °C = 100 h
Low-temperature torque, IP 186, -40 °C, start

Catégories: Autre

Région: ALGER / ALGERIE

Publiée le: 22-05-2022 à 14:15:05