The AV-GM0783-S1E 4x4 HDMI 1.3 & Full 3D support over CAT5 Matrix with IR Pass-through
has been tested for conformance to safety regulations and requirements, and has been certified
for international use. However, like all electronic equipments, the AV-GM0783-S1E should be
used with care. Please read and follow the safety instructions to protect yourself from possible
injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning
.
The AV-GM0783-S1E 4x4 HDMI 1.3 & Full 3D support over CAT5 Matrix with IR Pass-through
provides the most flexible and cost effective solution in the market to route high definition video
sources plus multi-channel (up to 7.1-channel) digital audio from any of the four HDMI sources
to the remote displays at the same time. Through low cost Cat-5/5e/6 LAN cables, not only high
quality video and audio can be transmitted to the display sites, but also users can switch among
four HDMI sources using the push-in button, Ethernet or remote control. With single power
design at the source site, each remote module is easily installed without power supply.
Furthermore, the built-in IR extension function makes users at display site access the DVD player,
PS3 or any HDMI supported devices directly!
High Speed HDMI-Deep Color & Full 3D support
HDCP compatible
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any HDMI source at any time
Supports 7.1 channel digital audio
Supports default HDMI EDID and learns the EDID of displays
The matrix master can switch every output channels to any HDMI inputs by push-in button,
IR remote control, Ethernet, or RS-232 control
Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from
remote receiver to matrix master
Allows to control matrix master through IR remote control at remote receiver’s site
Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better
HDMI source device (such as PS3), better grade HDMI display (such as Sony X-series HDTV),
and better quality solid CAT6 cable
Easy installation with rack-mounting and wall-mounting designs for master and receiver
respectively
Fast response time – 2~5 seconds for channel switch
has been tested for conformance to safety regulations and requirements, and has been certified
for international use. However, like all electronic equipments, the AV-GM0783-S1E should be
used with care. Please read and follow the safety instructions to protect yourself from possible
injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning
.
The AV-GM0783-S1E 4x4 HDMI 1.3 & Full 3D support over CAT5 Matrix with IR Pass-through
provides the most flexible and cost effective solution in the market to route high definition video
sources plus multi-channel (up to 7.1-channel) digital audio from any of the four HDMI sources
to the remote displays at the same time. Through low cost Cat-5/5e/6 LAN cables, not only high
quality video and audio can be transmitted to the display sites, but also users can switch among
four HDMI sources using the push-in button, Ethernet or remote control. With single power
design at the source site, each remote module is easily installed without power supply.
Furthermore, the built-in IR extension function makes users at display site access the DVD player,
PS3 or any HDMI supported devices directly!
High Speed HDMI-Deep Color & Full 3D support
HDCP compatible
Allows any source to be displayed on multiple displays at the same time
Allows any HDMI display to view any HDMI source at any time
Supports 7.1 channel digital audio
Supports default HDMI EDID and learns the EDID of displays
The matrix master can switch every output channels to any HDMI inputs by push-in button,
IR remote control, Ethernet, or RS-232 control
Allows controlling local HDMI sources such as DVD and TiVo by attached IR extender from
remote receiver to matrix master
Allows to control matrix master through IR remote control at remote receiver’s site
Extends video signal up to 35m (115 feet) over CAT5e at 1080p and likely longer with better
HDMI source device (such as PS3), better grade HDMI display (such as Sony X-series HDTV),
and better quality solid CAT6 cable
Easy installation with rack-mounting and wall-mounting designs for master and receiver
respectively
Fast response time – 2~5 seconds for channel switch
Catégories:
Informatique
Région:
ALGER /
ALGERIE
Publiée le:
10-08-2025 à 12:15:28
